H&M Micro shovelnose Kit or part out Mega 16 15 2 turn also, Allison V12 motor...

[BACKEMF]

I have a H&M roundnose, never cut but was painted by previous owner light corvette blue metallic. The paint is very nice, done in a car shop.

This is whats available:

1- H&M roundnose $80

1- Alan Piggot EDM aluminum adjustable strut.

1- Alan Piggot EDM aluminum rudder. Paired with the strut for $30

1- AMT 1/24th scale all chrome Allison V12 plastic model (unassembled with instructions) $20 (it came from the "spare parts kit" AMT model, very rare)

1-Assembled or not .125 stub and .098 flex cable with teflon and Drive dog $10


1- NEW Mega 16 15 2 turn 4600 KV motor $60

There is also a driver figure from a Tamiya 1/20th scale F1 car, he can be trimmed to fit.

This is a scale builders type kit but also very fast if setup right.

No rush...

Thanks for looking

Individual items priced as is, PM for KIT combo price. Not shure if I have a .098 Coupler but will look.

Making room...

I also have 2- 7cell packs of IB 1400s and 2- 6cell IB 1400 PAcks cycled and only used 3 times each max. One pack is in 3 x3 stick solderd end to end, others are in split brick formation.


Picture of boat motor kit, Mega motor, and driver figure:
http://www.rumrunnerracing.com/feforums/attachment.php?attachmentid=7497&d=1137802980

I would like to sell this as a full kit please, if the hull sells first then the rest of the bits can go separate, Sorry.

[Taylor Shaw]

Hey ray, is it a .125 flex shaft ?

[BACKEMF]

It's only .098 flex cable and a .125" stub, sorry.

The club will place an order with FDM or OSE soon enough so you can get the cable you need, plus the last thing I want to part out is the cable, sorry.

Ray

[Taylor Shaw]

It's only .098 flex cable and a .125" stub, sorry.

The club will place an order with FDM or OSE soon enough so you can get the cable you need, plus the last thing I want to part out is the cable, sorry.

Ray

Thanks Ray
I'll be wating for OK to drop in the orders :)

[BACKEMF]

Bump to top.

[BACKEMF]

Bump again.

Any offers on a package deal? I have a Hacker 30 amp controller to go with it too.

[NORMKRIS]

Ray.....how Long Is The Hull? You Indicated It's A Hydro And Marine.
Is This Correct? Let Me Know A.s.a.p.

Hope All Is Well With You.

Regards,

Norm

[BACKEMF]

It is 15" x 7" and weighs 5 oz bare. MICRO. ;)

Thanks for looking.

[NORMKRIS]

Ray.....tnx, Was Hoping It Was Their 22" Hull.
The Best To Ya,

Norm

[BACKEMF]

Thanks Norm.

So its just Jim and Jeff still interested.

Let me know at your earliest convenience Jim.

Thanks everyone.

Ray

[BACKEMF]

SOLD

Thank you Jeff!

[jeffm912]

Ray,

I got the boat today safe and sound. Very nice I'll get started on it right away. Thanks for a great deal!!!

Thanks,
Jeff

[BACKEMF]

Great to hear. I know you will put it to good use.

You are very welcome, stay safe whever you go.

[Gerwin Brommer]

Any hardware left ? If so, please mail me a pic of strut and rudder !

Gerwin

[BACKEMF]

Sorry Gerwin, it all went with the boat. If you were much earlier you would have had a shot at it.

All gone except 26- IB1400 batteries. I can use them for Receiver packs.

[Gerwin Brommer]

Oke.

Is there a link to Alan Piggot hardware ?

[BACKEMF]

He is just a friend that made some hardware by CNC & EDM. I think his name is in the list of members here. If you can't find his name to PM or email him let me know and I will ask him for you.

Alan Piggott

[jeffm912]

Ray,

Got her out to the pond today what a blast pretty good speed with that setup. Had to move the CG around a little because I mounted the motor a little too far forward but it gives me more tuning with battery placement in the rear.

[BACKEMF]

Right on! Nice work.

[jeffm912]

The side pipes held on until the first flip and then they gave up on me. Have to find some better adhesive just didn't want a gob of epoxy to where I have to repaint it. Now all I need is a Viper 2 and I'll be done buying for a while.

[JimClark]

Out of suriosity how do it do compared to the Notre dame?
Jim

Ray,

Got her out to the pond today what a blast pretty good speed with that setup. Had to move the CG around a little because I mounted the motor a little too far forward but it gives me more tuning with battery placement in the rear.

[jeffm912]

Jim,
It was more stable, but not as fast due to the wider front end. I am still working with the Irish Lady to find a good way to seal her up completely. So far a little silicone on the inside of the rear has done the trick. I'll keep testing them in the sand, and hope to have a few others as well.
Then again a 431 on the H&M compared to the 531 on the Irish Lady that could make up for the speed.

[Lifes a Drag]

Hi Jeff,

Was the H&M Shovelnose setup for a two pattery packs or just one?

Thanks!