WTB 1/8" shaft props

[jfruge]

I am working on 2 shovel N2 Sport Hydro and 1 N2 mono projects for my son and myself. We are going to stick to 1P 5000 ma setups with Mamba motors. That being said we dont have any 1/8" shaft props.

I am looking for some now! Anyone have any 1/8" shaft props they no longer use? "X432, X435, X632, Y535 "

ALso I have a question about plastic props. I do have some Minicatracing plastic props. "32mm 36mm" Anyone know if they will work well or do we really need to spend the cash on the good ones?

We will be racing these but our current club is mostly running 1P setups in their N2 mono and N2 sport Hydro classes.

Thanks,

[Ub Hauled]

john,
the plastic props will work fine on a non competitive level, if you wanna race then the metal props are a better choice since they don't bend out of shape under stress...
Sorry, I don't have any that I can sell ya.

[birdie]

i have several at home that are still in the package..

you want me to check and see what they are..? i am sure one is a 430..thereis even a 435 3-blade i believe..it may be an "M"..not an "X"..i ordered several props by mistake from Steve, and just never sent them back...

anyways..let me know sir..! :)

[watts=power]

The props on Minicatracingusa I beleve are 3mm props


The stub on the minicat is 3mm so I am assuming the props are 3mm to fit the stub


While close to 1/8, it will have some wobble without a shim


Andrew

[jfruge]

i have several at home that are still in the package..

you want me to check and see what they are..? i am sure one is a 430..thereis even a 435 3-blade i believe..it may be an "M"..not an "X"..i ordered several props by mistake from Steve, and just never sent them back...

anyways..let me know sir..! :)

Birdie, please take a look and let me know what you have.

Thanks,

[Randy Naylor]

I am working on 2 shovel N2 Sport Hydro and 1 N2 mono projects for my son and myself. We are going to stick to 1P 5000 ma setups with Mamba motors. That being said we dont have any 1/8" shaft props.

I am looking for some now! Anyone have any 1/8" shaft props they no longer use? "X432, X435, X632, Y535 "

ALso I have a question about plastic props. I do have some Minicatracing plastic props. "32mm 36mm" Anyone know if they will work well or do we really need to spend the cash on the good ones?

We will be racing these but our current club is mostly running 1P setups in their N2 mono and N2 sport Hydro classes.

Thanks,

John I just got a slug of props in stock today, I have all most all you need. and what I do not have is on back order.

Take a look

http://img117.imageshack.us/img117/4914/img0852111ip1.jpg (http://imageshack.us)

[zrchobbies]

I have a y535 and a 735 if you want. pm me

Zach

[Lifes a Drag]

saw this.......

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=260146164514&ssPageName=STRK:MEWA:IT&ih=016

[jfruge]

I have a y535 and a 735 if you want. pm me

Zach

PM comming Zach...

Thanks for the link Lifes a Drag

[jfruge]

Zack, you PM box is full.

How Much do you want for them shpped to madera, ca... Also are they NIP, raw , or S&B

PM or post...reply...

Thanks,

[jfruge]

Thanks Guys. As always I got what I needed!