PDA

View Full Version : Hardware WANTED!!!!!

REBEL RACING
07-09-2002, 02:05 PM
I want hardware for my rigger. Prop rudder inline. e-mail me at redneck9231@hotmail.com or post on here thanks!
K.R.Joye
07-09-2002, 02:27 PM
Hey Rebel were are you located? We have FE nuts all over Mi.
REBEL RACING
07-09-2002, 02:36 PM
I am located in Zeeland which is in the GR area.
Eric B
07-10-2002, 08:41 AM
Even though not many people sell there hardware, could someone that is knowledgable help him out with suggesting hardware . I want to race this guy.
Jeff Wohlt
07-10-2002, 09:42 AM
What size rigger and cell count?

Might be able to help just darn busy right now.
REBEL RACING
07-10-2002, 12:07 PM
the rigger is 22in. long as I said earlier and the cell count is 6 , but why does that matter for hardware? I don't understand that.

P.S. Eric bud out this has nothing to do w/ you save the room for people that are willing to help.
K.R.Joye
07-10-2002, 01:57 PM
Reb the hardware would be lighter duty on a 6-8 cell boat rather than a 12 or higher cell count boat.
You probably want to run a .130 flex cable to 1/8"stub shaft for car can motors.You can go with a roar stock motor for N-1 hydro or a lower turn modified can motor for N-2 hydro.Props would be for 1/8 shaft and vary in the 30-35 mm range for can motors.
As for hardware go with Fullers,Fines,BBY Fastelectrics or Hugheys.Most of them you can email with your boat specs and they will set you up.
Prop Shop in Warren,Mi.carrys Octura and Hughey hardware.They offer mail order service.Their site and all other mentioned are on our MMEU club site links.
http://www.mmeu.com

Good Luck!
REBEL RACING
07-10-2002, 02:14 PM
Thank you guys for the help, but I think I will end up making my own hardware because I don't have a lot of money that I want to spend on it anyways. Oh and I didn't mention it but I'm making my transum round beleive it or not its not just flat like normal boats its rounded when I get it done I'll post pictures of it to show y'all. My objetive is to complete it by the end of the summer.
K.R.Joye
07-10-2002, 02:27 PM
I make most of my hardware also.Let me know if you need any help.
REBEL RACING
07-10-2002, 03:22 PM
I'm sure I'll need help man, I think I could handle making it if it was flat but I'm affraid this will take a while to get it to work just so perfectly. Any help is apriated! If anyone has blueprints on how to make good running hardware that'll curve around my curved transum that would be tons of help! Thanks everyone!
Avenger
07-12-2002, 09:17 AM
the only thing to do in zeeland is sit on the curb!:D

i can get you a 1/8" strut... it is hard to make them!
REBEL RACING
07-12-2002, 11:11 AM
Hey buddy at Zeeland is cleaner than Holland we don't have all those gang banger wanna be's and all those immigrants
Avenger
07-12-2002, 06:10 PM
man calm down killer, im just playin'! i dont live in holland i live on the north side of lake mac! lot cleaner up here! well once all the blueberry fileds are sub-devisions that will not be a problem!
Eric B
07-12-2002, 07:50 PM
Well there isnt much in Zeeland.