NEW 8-12 cell brushless for less than $200!!!!!

[Andrewg]

See the hot deals at www.fastelctrics.com and smile!

[matt6669]

andrew you typed it in wrong
for anyone who wants to go
www.fastelectrics.com

[JimClark]

Andrew when you get the Grupner props are you going to carry the right hand ones also?
Jim Clark

Originally posted by Andrewg
See the hot deals at www.fastelctrics.com and smile!

[Andrewg]

Jim
I will get the RH props - if you tell me what sizes you need I can probably get you a few immeidately.

Andrew

[JimClark]

Is there somewhere I can find a list? I have a hydro 1/10th scale and currently use the Octura X447R and have also played with cutting some down but I would like to know what is available. I am fairly new to Boats and I don't know a whole lot about props. I just know the X447 works as that is the only prop that is used in out club.
thanks
Jim Clark
Originally posted by Andrewg
Jim
I will get the RH props - if you tell me what sizes you need I can probably get you a few immeidately.

Andrew

[Andrewg]

Jim

I will try and get a little variety around 47mm if that is possible

the Graupners are 1.2 pitch vs Octuras 1.35 and the are cut more like the Octura M series than the X series so all in all they wind out more but balance that with less pitch so it might be worth cutting down a larger prop

I will let you know asap

[Paul]

Hello Andrew,

On the micro Mega/Jeti combo, is that a bec controller?

Paul.

[JimClark]

Sorry for being dense about props Andrew but could you explain the difference to me and what the results should be? Such as the difference in pitch and the difference between the M and X series?
Thanks
Jim clark

Originally posted by Andrewg
Jim

I will try and get a little variety around 47mm if that is possible

the Graupners are 1.2 pitch vs Octuras 1.35 and the are cut more like the Octura M series than the X series so all in all they wind out more but balance that with less pitch so it might be worth cutting down a larger prop

I will let you know asap

[willem zwaan]

andrew, what does a BL esc kost: for 20cells RC3000HV and a Viper 740/10 motor. (Brushless) I think I should use that Kontronik 70Amp or something?!
So what does such a esc kost?
THANKS!
Willem :D

[Andrewg]

Willem

the Master 77-3P is $219
I think it is a better more robust controller than the Kontronik 70 for similar money

[willem zwaan]

Andrew!
sorry for beiing late on the reply!
GOOD PRICE!
I am still thinking about that 62wo from schulze...because I can use that one for a mono1 motor viper 25/11.
See Ya!
Willem :D

[Pooley929]

Now thats a SWEET pic

[Andrewg]

Paul

the Mega Jeti combo can be BEC or opto.



Jim

I have attached a pic of X (left) and M (right) series props

The X has a line drawn indicating the area removed to make it an M series

this removes the slowest part of the blade which one theory has it fights the faster higher pitched areas of the blade (the trailing edges) at high speed

It moves the distribution of blade area toward the mid blade area - this modification lets the blade spin faster

THe M series on the right is a larger diameter prop it looks like amuch thicker set prop - some of this is just the by product of the photo technigue I used

The Graupner props look like an X series prop with the tongue removed.

It has a pitch ratio of 1.2 vs the approximatley 1.35of the Octura X400's and the 1.5 of the Octura X600

Just out of interest the X457R would cut down to a X648R - you may want to get someone like Randy Rapadeus to do that sort of a mod for you it could be good.

[Andrewg]

Willen

The Master is design to operate relaibly down to six cells so for mono one it so for mono 1 it should be fine.

[Al E.]

Willen,

Nice pic of that german hull - may I ask what you're running in it?

Thx, Al.

[willem zwaan]

Hi AL!
haha It isn't mine "yet"...
I'm almost 18years old...and I want to buy one of these monsters.
This is a mono3, and I want to run it on 20 RC3000H cells. or better...the motor will problebly be a Viper 740/x 9 or 10windings.
But the thing is...I am figuring out what cind of controller I have to use. Because I want to run a mono1 hull also with a brushless motor. So I don't have to buy 2controllers you see...
AND...IT COSTS A LOT OF MONEY! for me that is...only 18years and still going to school. (accountencie)
So maybe this baby will be mine...in a couple of weeks.

See Ya!
Willem :D

Andrew,
I just mailed Rainer.
If this is al true...then this one is THE BOMB!
6-32cells...huahuahuahuahua:p :D :eek:

[Andrewg]

Willem

I spoke to Rainer night before last and he assured me the controllers shoudl go that low.

Andrew

[rc.hackmaster]

i am new here and will be racing with jim clark. and also interested in props to go FASTER! if you can help me also, please send me som info where to order more props! dont mind trial and error. been there done that with rc cars! gotta tune to go fast!

[mark]

ya, sweet pic... sweet boat!:)