Wanted Deep V Hull!!!!

[EVADER09]

If anyone has a deep V hull for sale I am intrested.

[Steven Vaccaro]

If your looking for a hull only check out

http://www.finedesignrc.com/hulls.asp

The 29 & 32" hulls are cheap and run real well!

[Drobie]

You can get an Electro Vee from Hobby Lobby for 30 bucks. (3 for $59)

[EVADER09]

Hey guys thanks for the help I was actually looking at that hull. Do you guys think its possible to put jet drive in that? or use that speed 700 kit?

[eddieh]

Evader, if you are looking for an electrovee with a jet drive A guy in my club is selling one complete for 75,, but Let me tell ya, I can give him a run with my chris craft, I don't really recommend that set up at all,, I would run a 700 either a fine design or a fastelectrics graupner 700 8.4 and 12 cells, there are plenty of threads on the board regarding this hull, don't get the hardware package from hobby-lobby as it is much adieu over nothing, go with either the fuller or fine design mono set up or octura or build your own, couple of threads on that too , the octura 642 runs good with that set up, did you check all the offers here on the the swop shop, there are some killer deals goin.. on there, furiousgeorge, brian williams, ray fuller, twnmaster,read em over,great deals,, anyway good luck, cheers eddie

[EVADER09]

My budget isn't big enough for fullers or anything like that and I found the 700 wuite cheap at another place so I'm gunna buy it all seperate and build it all up myself.

[Pooley929]

I've got a EV that I'll part with Fuller/Fine hardware, trim tabs, trun fin, antenna, motor mount, 700bb with water cooler coil and prop $175 and a Pistolaro used and new black hawk Fountains email me for pics and price

[EVADER09]

Thanks but no thanks I was looking for a cheaper one. Like just a hull.

[Drobie]

Originally posted by Pooley929
I've got a EV that I'll part with Fuller/Fine hardware, trim tabs, trun fin, antenna, motor mount, 700bb with water cooler coil and prop $175

Evader, you will be very hard-pressed to build one for less than that.

Hull $30
Hardware $100
Motor $25-40
Prop $13
Motor mount $5, etc., etc, etc.

And oh yeah, throw in the cost of labor, adhesives, sand paper, etc.

The only way you can do it is to fabricate your own hardware.

$175 is a good buy.

[EVADER09]

Yeah doug I found what I'm going to do.

EV Hull $25
motor $33
all hardware needed $20
+ other little things

I got it worked out so it'll be less than $175 to get it all running w/ esc and all