FS: NEU motors

[Bustitup]

I have one of each...the smooth one is used and the finned one is brand new

these will work in a truggy or boat just fine...they have built in fan

$175 for the new one shipped USA

$150 for the used one

http://www.rgcbuilders.net/heli.jpg

[michigan maniac]

Trade for some props? Dont you have a large twin cat? I have some nice cmdi props if interested.

[Bustitup]

Trade for some props? Dont you have a large twin cat? I have some nice cmdi props if interested.

any large L&R?

[michigan maniac]

Go large or go home right! Yes, L&R 62mm sharp balance and cupped to 4.8" total pitch. 62mm this set is. I have larger if you need. They were about 180 for the set and still in the sealed package from Andy Brown. These are for 3/16 prop shaft. I have those I would throw in if you need them. They are 1/4" flex stepped to 3/16' and I can include drive dog as well. L&R shafts.

[Bustitup]

So what motor u want?,,,,,,in fact call me please 561 662 8684



Go large or go home right! Yes, L&R 62mm sharp balance and cupped to 4.8" total pitch. 62mm this set is. I have larger if you need. They were about 180 for the set and still in the sealed package from Andy Brown. These are for 3/16 prop shaft. I have those I would throw in if you need them. They are 1/4" flex stepped to 3/16' and I can include drive dog as well. L&R shafts.

[michigan maniac]

Nick, Sorry we missed calls there. Had to run out for a minute. Actually after closer looking I could have sworn it said 1.5D. The boat I had in mind could not handle the cell count that this would need. Thank you for your response.