PDA

View Full Version : Wanted an Octura X646 prop

JimClark
03-13-2002, 07:19 PM
Wanted an Octurs X646 prop.

Thanks
Jim Clark
chris10987
03-13-2002, 07:58 PM
Hey why not just buy a new one. They are only about $ 12.00. You can get the prop at Fine Design.
Avenger
03-13-2002, 08:34 PM
or do u want it pre-sharpened and pre-balenced? cuz Fullers will do it for you for like $30 i think + shipping. -Jeff
Avenger
03-13-2002, 10:05 PM
ok sorry there buddy! just trying to get it straight! -Jeff
Ray Fuller
03-14-2002, 11:01 AM
Jim the X646 is a lot larger than the X447 you wont be able to pull that prop. Ray
Ray Bidwell
03-14-2002, 11:17 AM
Jim I have one still in the package I think. I could send it to you if it works you can send me $15 if not send it back. If this will work for you E-mail me. bidwell@aol.com
JimClark
03-14-2002, 03:21 PM
Ray could you elaborate further? Someone reccomended it to me and I looked at teh dimensions and it is 1mm smaller in diameter.

Thanks
Jim clark

Originally posted by Ray Fuller
Jim the X646 is a lot larger than the X447 you wont be able to pull that prop. Ray
eddieh
03-15-2002, 12:25 AM
Jim what I think Ray meant was that the diameter of the prop is indeed smaller, but the pitch is greater and has more surface area, making it a bigger prop, here's the specs for the two props x646 = 1.81" 2.896" & x447= 1.85" 2.590" hope this helps, cheers ed
JimClark
03-15-2002, 12:43 AM
Thanks for that clarification. I will just stick with what I am using now.
Thanks again
Jim Clark
eddieh
03-15-2002, 03:04 PM
jIM jUST A tHOUGHT,,,, HAVE ANY OF YOUR GUYS TRIED THE PROP SHOP???? THEY MAKE MOST OF THEIR PROPS IN EITHER L OR R ROTATION,,,, i HAVE THEIR CATALOGUE IN PDF FORMAT IF YOU WANT IT ,,,, i DO UNDERSTAND THAT YOU REALLY JUST WANT TO TEST A PROP BEFORE LAYIN DOWN HARD EARNED FROG SKINS,,,, BUT IF YA WANT TO HAVE A LOOK, i'LL SEND IT OFF TO YA, CHEERS ED